Granted, I haven’t had the x-bow for very long, but Red Hot scopes are generally pretty reliable. It sights in quite easily, and so far hasn’t required any adjustments at all. This crossbow ships with a 4×32 non-illuminated scope. The Ambusher draws as smooth as butter, and the string capture works flawlessly every time. Using the aid helps ensure you pull the string back evenly. I recommend using a rope cocking device whatever draw weight you choose, of course. You can set it up, without using a bow press, from 135 pounds to 160 pounds. That’s not the case with the Ambusher, which has an innovative design that allows you to adjust the draw weight. Usually, I explain how much energy you save using a rope cocking device, but that’s because most crossbows have a single draw weight. The arrow passed clean through the animal, and he barely managed to stumble off 10 yards before expiring. I just wish I’d gotten the illuminated scope instead of the non-illuminated one, but I was still able to take down a 10-point buck with a single shot. I added a shoulder sling to mine, and loved hunting with this model. The only drawback to the Ambusher is its weight, around seven pounds.Įven with the weight, I found it easy to carry this x-bow around in the field. It’s also got the accuracy you need for kill shots. It’s short enough to maneuver easily in a ground blind or deer stand, measuring just 32.25 inches long with an axle-to-axle length of 20.875 inches. I used mine on a recent deer hunt, and found it to be more than capable. I haven’t had the opportunity to use this x-bow much in the field, but it’s already made its first kill. See our Crossbow Ballistics Guides section for a complete understanding of how we conducted our tests and why this data matters. Your actual results will vary slightly depending on weather, and significantly with arrow weight change. Use our arrow ballistics calculator for more valuable information. If that doesn’t sound like very far, you might be new to crossbows and benefit from reading our article on how far you can realistically shoot. This crossbow is a nail driver, plain and simple, and I was quickly laying down 2-inch groupings from 45 yards. Once the scope is sighted in, you should enjoy pinpoint accuracy out of the Ambusher. The Ambusher isn’t the most powerful x-bow on the market, but it’s got enough beef to take down Cape buffalo or grizzly bears. With a 400-grain arrow, that should yield you around 88 foot-pounds of kinetic energy. If you max out the draw weight at 165 pounds, your Ambusher x-bow will fling arrows down range at a blistering 315 feet per second. In fact, I was able to have my Ambusher up and ready to sight in within 10 minutes. Once you get to the right set of instructions, you’ll find them easy to understand and follow. Parker has chosen to incorporate assembly instructions for all of their crossbows into a single manual, so you’ll need to look through the directions until you find the right model. How Difficult Is It to Assemble Your New Crossbow? You’ll also need a variety of hex wrenches, including 3/32-inch, 5/32-inch, and 3/16-inch, for assembly and for adjusting the draw weight. These are essential accessories to have, so I strongly recommend having them on hand. You won’t find a rope cocking device, rail lube, or string wax, I’m afraid.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |